BILLIARDS DESCRIPTION
GLOSSARY
1. The frame
2. The pockets
3. The slate
4. The cloth or table cover
5. The rails
6. Markers
7. Leg
8. Frame
9. Leveling screw

Does the language of billiards seem complicated to you, and do the terms used seem to come from a specialist vocabulary?
Consult our glossary to familiarize yourself with this language.
BILLIARD ASSEMBLY GUIDE
Click on the photos below to view the guide for installing a billiard table.



PLAYING TECHNIQUE
Is it easy to play billiards? The rails are used a lot, and that is often where things get complicated. Click on the image to watch the demonstration.
BILLIARD TABLE DIMENSIONS
There are several billiard tables of different dimensions, but the playing surface is always a rectangle whose length is twice its width. There are two main families of billiard tables: pocket billiard tables (with 6 pockets) for American Billiards, Snooker, and 8-Ball, and pocketless billiard tables on which French Billiards are played. W.E.P.F. Regulations (Regulations accepted by W.E.P.F. members)
• The balls must be 50.8 mm in diameter and weigh 116 grams (+ or - 2 grams).
• The cue ball must be 47.6 mm in diameter and weigh an average of 94 grams.
• The maximum playing surface must be 213.36 cm x 106.68 cm (the playing surface represents the dimension of the slate between the rails, where
the balls come into contact).
• The minimum playing surface must be 182.88 cm x 91.44 cm.
• The rails must touch the slate.
• The table height must be between 80 and 85 cm - the cloth laid on the slate and the rails must be woolly.
• The dimension and cut of the pockets must conform to those agreed with the W.E.P.F.
• The minimum pocket depth must be 85 mm on the sides and 95 mm in the middle.